DER GRIFF, AUS DER NÄHE01 / Excel 2-Piece Round
  • Winn 2PWR-BKG golf grip, official product photo
1 1

Winn

Winn Excel 2-teiliger runder Puttergriff

Winn Excel 2-teiliger runder Puttergriff

This two-piece Excel grip provides separate round gripping sections for a long-putter setup. The black-and-gray design uses a .620-inch core and has a manufacturer-listed combined weight of 134g.

MediumTwo-piece round
Griffeigenschaften ansehen
$26.95
$26.95
Sale Ausverkauft
Versand wird beim Checkout berechnet

Separate round sections for a long-putter build.

Farbe

One two-piece grip set per quantity selected. Installation supplies and service are sold separately.

Technische Daten
Bereit für neue Griffe?Optionales Zubehör
Nur Basic Brampton Griff-Set
Nur Basic Brampton Griff-Set

Grifftape + 4 oz HF-100 Montagelösung

Montierst du zu Hause? Ergänze Tape und Montagelösung, falls du noch kein Montagematerial hast.

 Vollständige Details anzeigen

Winn / GRIFFWELT

Give your long putter some room to work.

This two-piece Excel grip provides separate round gripping sections for a long-putter setup. The black-and-gray design uses a .620-inch core and has a manufacturer-listed combined weight of 134g.

Die Details, die deinen Griff ausmachen

Dein Griff auf einen Blick

Puttergriff
Form
Two-piece round
Griffgefühl
Medium
Oberflächenstruktur
Wrap-style surface
Material
Excel polymer
Winn Excel 2-Piece Round Black/Gray (2PWR-BKG), official product photo01

Two sections. One planned fit.

Separate round sections let a compatible long-putter build accommodate separated hand positions.

Manufacturer photography: Winn. Illustrated color and size may differ from your selection.

02 / Technische Daten

Wisse genau, was du in der Hand hast.

Technische Referenzdaten des Herstellers. Wähle oben in den Produktoptionen deine Größe und Farbe.

Herstellerangaben
Aufbau
Excel polymer
Oberflächenstruktur
Wrap-style surface
Profil
Two-piece round
Kompatibilität
For a compatible long-putter shaft. Confirm both section positions and shaft diameters before applying tape. The .620-inch figure is the core opening, not the installed outside diameter.
GrößeInnendurchmesserNenngewicht
2-Piece RoundCombined weight of both sections0.620 in134 g

Manufacturer nominal specifications. Core size is the shaft opening, not the finished outside diameter. Check the grip packaging and shaft before installation.

Die Gewichte sind Nennwerte des Herstellers und können abweichen. Der Innendurchmesser bezeichnet die Grifföffnung, nicht den Außendurchmesser des montierten Griffs. Prüfe vor der Montage den Durchmesser am Schaftende und die Montagemethode.

03 / Finde dein Griffgefühl

Der passende Griff fühlt sich richtig an.

A specialist fit for long putters and separated hand positions. Confirm the shaft diameter and grip placement with your club builder before installation. The .620-inch core opening must fit both intended shaft positions. This set is not a one-piece replacement grip.

Zurück zur Auswahl
Wie wähle ich die Größe eines Puttergriffs?

Probiere Form und Größe mit deiner gewohnten Griffhaltung beim Putten aus. Die flache Vorderseite, die Form der Rückseite und der Durchmesser beeinflussen, wie deine Hände am Griff anliegen. Wähle die Kombination, die für dich am angenehmsten ist. Handmaße zur Größenwahl bei Griffen für Hölzer und Eisen bestimmen nicht die passende Puttergriffgröße.

Für Hölzer & Eisen: Griffgrößenrechner
Can I use this like a one-piece putter grip?

It is a two-section set for a compatible long putter. The lower sleeve and upper capped section need planned positions on the shaft. Check both shaft diameters and hand positions before installation; the listed 134g is the combined nominal weight.

Wie montiere ich diesen Griff?
  1. Check shaft diameter at both sections; mark their positions. Gather tape, compatible solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; ventilate and avoid flames.
  2. Clamp gently. Cut the old grip away from your body; remove it and old tape. Never cut or scrape graphite. Clean and dry the shaft.
  3. Tape both marked areas with one layer; remove backing. Fold 1/4 inch over the shaft end. No build-up tape.
  4. Wet the lower sleeve and taped shaft with solvent. Slide the lower sleeve on first to its mark, without stretching or twisting.
  5. Cover the upper vent hole; wet inside and its taped area. Slide the upper section on; seat its cap at the shaft end. Check both positions.
  6. Wipe excess solvent. Follow label drying times. Before play, check both sections are dry, secure and cannot twist.
Wie reinige und pflege ich diesen Griff?
  1. Dampen a soft towel lightly with water and gently wipe the grip. Do not saturate the towel or immerse the grip.
  2. Pat dry with a soft towel. Do not rub vigorously, use a brush or wash with soapy water; these can damage the surface.
  3. Let the grip dry fully before storage and check for surface wear before play.