01A shaped upper-hand reference.
The pistol silhouette carries its upper-hand arc into the butt of the grip.
THE GRIP, UP CLOSE01 / Zenergy 2.0 PT
SuperStroke
SuperStroke Zenergy 2.0 PT Putter Grip
SuperStroke Zenergy 2.0 PT Putter Grip
The Zenergy 2.0PT brings a slightly larger profile to the compact, traditional PT design. A pronounced arc beneath the upper hand provides a clear reference for golfers who favor a pistol-shaped putter grip.
See grip characteristicsRegular price
$34.95 USD
Regular price
Sale price
$34.95 USD
Shipping calculated at checkout.
Choose 2.0PT for a little more width and weight than 1.0PT while retaining a traditional pistol reference.
Quantity
Couldn't load pickup availability
One grip per quantity selected. Choose the options for your build. Installation supplies are sold separately.
SpecificationsReady to regrip?Optional add-on
Just Basic Brampton Grip Kit
Grip tape + 4 oz HF-100 solvent
Installing at home? Add tape and solvent if you don’t already have your supplies.
SuperStroke / GRIP ROOM
The PT shape, with a little more volume.
The Zenergy 2.0PT brings a slightly larger profile to the compact, traditional PT design. A pronounced arc beneath the upper hand provides a clear reference for golfers who favor a pistol-shaped putter grip.
The details that shape your grip
Grip at a glance
- Profile
- Compact pistol
- Feel
- Soft polyurethane outer
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Construction
- Polyurethane outer layer
0102 / Specifications
Know exactly what you’re gripping.
Manufacturer reference specifications. Choose your size and color in the product options above.
Manufacturer details- Construction
- Polyurethane outer layer
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Profile
- Compact pistol
- Compatibility
- This model has no Tech-Port and cannot accept a CounterCore weight.
- Width
- 1.02 in
- Length
- 10.6 in
| Size | Core | Nominal weight |
|---|---|---|
| 2.0 PTNo Tech-Port | 0.600 in | 76 g |
Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.
03 / Find your feel
Good fit starts with feel.
Check the 0.600-inch core and full 10.6-inch length against your shaft. The nominal grip weight is 76 g; compare the balance with your putter head and usual putting hold.
Back to optionsHow should I choose a putter grip size?
Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.
For woods & irons: grip calculatorCan I add a CounterCore weight?
This model has no Tech-Port and cannot accept a CounterCore weight.
How do I install this grip?
- Check shaft fit and usable length. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
- Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
- Clean and dry the shaft. Apply smooth double-sided grip tape, peel its backing and fold the overhang over the shaft end.
- Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
- Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the grip square to the putter face before it sets.
- Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
- Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
- Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
- Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.