THE GRIP, UP CLOSE01 / Zenergy Flatso 3.0
  • SuperStroke Zenergy Flatso 3.0 Putter Grip - Black/White
1 1

SuperStroke

SuperStroke Zenergy Flatso 3.0 Putter Grip

SuperStroke Zenergy Flatso 3.0 Putter Grip

The 1.38-inch-wide Flatso 3.0 is the fullest of the three standard Flatso profiles. Its pentagonal shape offers a broad contact surface, with Zenergy multi-zone texture and an enhanced SPYNE ridge.

Soft polyurethane outerPentagonal flat-front / No Taper
See grip characteristics
$34.95 USD
$34.95 USD
Sale Sold out
Shipping calculated at checkout.

Choose it when a wider, more substantial handhold feels right. Compare its 61-gram weight and five-sided profile with your current grip before changing your putter setup.

Color

One grip per quantity selected. Choose the color in the product options. CounterCore weight and installation supplies are sold separately.

Specifications
Ready to regrip?Optional add-on
Just Basic Brampton Grip Kit
Just Basic Brampton Grip Kit

Grip tape + 4 oz HF-100 solvent

Installing at home? Add tape and solvent if you don’t already have your supplies.

 View full details

SuperStroke / GRIP ROOM

More width. The same flat-front idea.

The 1.38-inch-wide Flatso 3.0 is the fullest of the three standard Flatso profiles. Its pentagonal shape offers a broad contact surface, with Zenergy multi-zone texture and an enhanced SPYNE ridge.

The details that shape your grip

Grip at a glance

Putter grip
Profile
Pentagonal flat-front / No Taper
Feel
Soft polyurethane outer
Surface
Multi-zone texture and enhanced SPYNE ridge
Outer layer
Polyurethane outer layer
SuperStroke Zenergy Flatso 3.0 Putter Grip - Black/White01

A wider front surface.

Flatso 3.0 gives your hands the largest profile in the standard Flatso range.

Official SuperStroke photograph of this exact model. The native product gallery shows the available colors.

02 / Specifications

Know exactly what you’re gripping.

Manufacturer reference specifications. Choose your size and color in the product options above.

Manufacturer details
Construction
Polyurethane outer layer
Texture
Multi-zone texture and enhanced SPYNE ridge
Profile
Pentagonal flat-front / No Taper
Compatibility
Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.
Width
1.38 in
Length
10.60 in
SizeCoreNominal weight
Flatso 3.0Grip only; no CounterCore weight included0.580 in61 g

Manufacturer nominal specifications for this exact Zenergy model. Verify packaging, shaft dimensions and fit before installation.

Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.

03 / Find your feel

Good fit starts with feel.

Match the 0.580-inch core to the shaft and build. The nominal grip weight is 61 g; changing grip weight can change how the putter head feels. Test the shape with your usual putting hold.

Back to options
How should I choose a putter grip size?

Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.

For woods & irons: grip calculator
Can I add a CounterCore weight?

Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.

How do I install this grip?
  1. Check the 0.580-inch core against the shaft diameter and ensure the shaft has room for the full 10.60-inch grip. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
  2. Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
  3. Clean and dry the shaft. Apply one smooth layer of double-sided grip tape, peel its backing and fold the overhang over the shaft end.
  4. Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
  5. Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the broad, flat front square to the putter face before it sets.
  6. Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
  1. Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
  2. Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
  3. Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.