THE GRIP, UP CLOSE01 / Zenergy Pistol Lock 1.0
  • SuperStroke Zenergy Pistol Lock 1.0 Putter Grip - Black/White
1 1

SuperStroke

SuperStroke Zenergy Pistol Lock 1.0 Putter Grip

SuperStroke Zenergy Pistol Lock 1.0 Putter Grip

The Zenergy Pistol Lock 1.0 brings a traditional pistol silhouette into the Zenergy range. Its sculpted upper section offers a clear hand-position reference for golfers who prefer a more defined shape at the top of the grip.

Soft polyurethane outerPistol / double-bend upper section
See grip characteristics
$39.95 USD
$39.95 USD
Sale Sold out
Shipping calculated at checkout.

Choose the 1.0 for the narrower 1.05-inch Pistol Lock profile. At 103 grams, it is heavier than the 60-gram 2.0 despite its smaller width.

Color

One grip per quantity selected. Choose the options for your build. Installation supplies are sold separately. CounterCore weights are sold separately.

Specifications
Ready to regrip?Optional add-on
Just Basic Brampton Grip Kit
Just Basic Brampton Grip Kit

Grip tape + 4 oz HF-100 solvent

Installing at home? Add tape and solvent if you don’t already have your supplies.

 View full details

SuperStroke / GRIP ROOM

A pronounced pistol profile for your upper hand.

The Zenergy Pistol Lock 1.0 brings a traditional pistol silhouette into the Zenergy range. Its sculpted upper section offers a clear hand-position reference for golfers who prefer a more defined shape at the top of the grip.

The details that shape your grip

Grip at a glance

Putter grip
Profile
Pistol / double-bend upper section
Feel
Soft polyurethane outer
Texture
Multi-zone texture and enhanced SPYNE ridge
Construction
Polyurethane outer layer
SuperStroke Zenergy Pistol Lock 1.0 Putter Grip - Black/White01

A sculpted pistol contour.

The double bend in the upper section creates a distinctive reference beneath the top hand.

02 / Specifications

Know exactly what you’re gripping.

Manufacturer reference specifications. Choose your size and color in the product options above.

Manufacturer details
Construction
Polyurethane outer layer
Texture
Multi-zone texture and enhanced SPYNE ridge
Profile
Pistol / double-bend upper section
Compatibility
Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.
Width
1.05 in
Length
10.6 in
SizeCoreNominal weight
Pistol Lock 1.0Grip only; no CounterCore weight included0.600 in103 g

Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.

03 / Find your feel

Good fit starts with feel.

Check the 0.600-inch core and full 10.6-inch length against your shaft. The nominal grip weight is 103 g; compare the balance with your putter head and usual putting hold.

Back to options
How should I choose a putter grip size?

Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.

For woods & irons: grip calculator
Can I add a CounterCore weight?

Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.

How do I install this grip?
  1. Check shaft fit and usable length. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
  2. Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
  3. Clean and dry the shaft. Apply smooth double-sided grip tape, peel its backing and fold the overhang over the shaft end.
  4. Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
  5. Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the grip square to the putter face before it sets.
  6. Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
  1. Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
  2. Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
  3. Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.