01Shaped for wrist contact.
The upper section provides a defined contact point for the wrist in your putting setup.
THE GRIP, UP CLOSE01 / Zenergy WristLock
SuperStroke
SuperStroke Zenergy WristLock Putter Grip
SuperStroke Zenergy WristLock Putter Grip
The 13.75-inch Zenergy WristLock is shaped to support contact with the upper wrist. It works with right- or left-handed setups and several putting styles. Significant shaft lean or forward press may require a putter-loft adjustment for a suitable roll.
See grip characteristicsRegular price
$39.95 USD
Regular price
Sale price
$39.95 USD
Shipping calculated at checkout.
Try it with your usual putting hold and upper-wrist position. Have a fitter check loft if your setup uses substantial forward press or shaft lean.
Quantity
Couldn't load pickup availability
One grip per quantity selected. Choose the options for your build. Installation supplies are sold separately. CounterCore weights are sold separately.
SpecificationsReady to regrip?Optional add-on
Just Basic Brampton Grip Kit
Grip tape + 4 oz HF-100 solvent
Installing at home? Add tape and solvent if you don’t already have your supplies.
SuperStroke / GRIP ROOM
A defined connection to your upper wrist.
The 13.75-inch Zenergy WristLock is shaped to support contact with the upper wrist. It works with right- or left-handed setups and several putting styles. Significant shaft lean or forward press may require a putter-loft adjustment for a suitable roll.
The details that shape your grip
Grip at a glance
- Profile
- Extended upper-wrist contact
- Feel
- Soft polyurethane outer
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Construction
- Polyurethane outer layer
0102 / Specifications
Know exactly what you’re gripping.
Manufacturer reference specifications. Choose your size and color in the product options above.
Manufacturer details- Construction
- Polyurethane outer layer
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Profile
- Extended upper-wrist contact
- Compatibility
- Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.
- Width
- 1.23 in
- Length
- 13.75 in
| Size | Core | Nominal weight |
|---|---|---|
| WristLockGrip only; no CounterCore weight included | 0.580 in | 75 g |
Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.
03 / Find your feel
Good fit starts with feel.
Check the 0.580-inch core and full 13.75-inch length against your shaft. The nominal grip weight is 75 g; compare the balance with your putter head and usual putting hold.
Back to optionsHow should I choose a putter grip size?
Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.
For woods & irons: grip calculatorCan I add a CounterCore weight?
Tech-Port accepts an optional CounterCore weight, sold separately. A weight is not included with the grip. Check the exact accessory and model before combining add-ons.
How do I install this grip?
- Check shaft fit and usable length. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
- Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
- Clean and dry the shaft. Apply smooth double-sided grip tape, peel its backing and fold the overhang over the shaft end.
- Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
- Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the grip square to the putter face before it sets.
- Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist. Have a fitter check wrist contact and loft for your setup.
How do I clean and care for this grip?
- Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
- Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
- Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.