THE GRIP, UP CLOSE01 / D2R Rubber 360
  • Winn 360-BK golf grip, official product photo
1 1

Winn

Winn D2R 360 Rubber Golf Grip

Winn D2R 360 Rubber Golf Grip

The Winn Rubber 360 uses an all-around rubber design that stays visually consistent when an adjustable club’s shaft orientation changes. This black Standard grip has a tapered profile and a manufacturer-listed weight of 49g.

MediumTapered / 360-degree design
See grip characteristics
$7.95 USD
$7.95 USD
Sale Sold out
Shipping calculated at checkout.

Standard Black, with an all-around design for adjustable clubs.

Calculate my grip size
Size
Color

One replacement grip per quantity selected. Installation supplies and service are sold separately.

Specifications
Ready to regrip?Optional add-on
Just Basic Brampton Grip Kit
Just Basic Brampton Grip Kit

Grip tape + 4 oz HF-100 solvent

Installing at home? Add tape and solvent if you don’t already have your supplies.

 View full details

Winn / GRIP ROOM

Adjust the club. Keep the same look.

The Winn Rubber 360 uses an all-around rubber design that stays visually consistent when an adjustable club’s shaft orientation changes. This black Standard grip has a tapered profile and a manufacturer-listed weight of 49g.

The details that shape your grip

Grip at a glance

Swing grip
Feel
Medium
Texture
Moderate texture
Profile
Tapered / 360-degree design
Material
Rubber
Winn D2R Rubber 360 Standard / Black (360-BK), official product photo01

A consistent look around the shaft

The all-around rubber design suits clubs whose shaft orientation changes with an adjustment.

Manufacturer photography: Winn. Illustrated color and size may differ from your selection.

02 / Specifications

Know exactly what you’re gripping.

Manufacturer reference specifications. Choose your size and color in the product options above.

Manufacturer details
Construction
Rubber
Texture
Moderate texture
Profile
Tapered / 360-degree design
Compatibility
Match the shaft diameter to the grip core and check fit before installation.
SizeCoreNominal weight
Standard—49 g

Standard 360-BK has a nominal weight of 49g. Confirm core fit against the grip packaging and shaft before installation; finished grip size and core diameter are different measurements.

Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.

03 / Find your feel

Start with your measurements.

Calculate my grip size

A useful match for adjustable woods and hybrids, or any club where you prefer a clean 360-degree grip design.

Back to options
How do I choose the right grip size?

Use the Club Rehab Grip Size Calculator for a starting size. Enter hand length, middle-finger length and glove size, then compare the result with the options on this page.

Calculate my grip size
Why choose a 360-degree grip?

An adjustable club can change shaft orientation when its setting changes. The all-around Rubber 360 design keeps a consistent look around the shaft. This listing is the Standard 360-BK model.

How do I install this grip?
  1. Check shaft fit. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
  2. Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
  3. Unwrap only when ready; do not bend or twist the grip. Clean and dry the shaft. Apply one layer of double-sided tape, peel backing and fold 1/4 inch over the shaft end.
  4. Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
  5. Slide fully on while wet. Seat the cap against the shaft end and straighten before it sets.
  6. Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
  1. Dampen a soft towel lightly with water and gently wipe the grip. Do not saturate the towel or immerse the grip.
  2. Pat dry with a soft towel. Do not rub vigorously, use a brush or wash with soapy water; these can damage the surface.
  3. Let the grip dry fully before storage and check for surface wear before play.