THE GRIP, UP CLOSE01 / Excel 2-Piece Round
  • Winn 2PWR-BKG golf grip, official product photo
1 1

Winn

Winn Excel 2-Piece Round Putter Grip

Winn Excel 2-Piece Round Putter Grip

This two-piece Excel grip provides separate round gripping sections for a long-putter setup. The black-and-gray design uses a .620-inch core and has a manufacturer-listed combined weight of 134g.

MediumTwo-piece round
See grip characteristics
$26.95 USD
$26.95 USD
Sale Sold out
Shipping calculated at checkout.

Separate round sections for a long-putter build.

Color

One two-piece grip set per quantity selected. Installation supplies and service are sold separately.

Specifications
Ready to regrip?Optional add-on
Just Basic Brampton Grip Kit
Just Basic Brampton Grip Kit

Grip tape + 4 oz HF-100 solvent

Installing at home? Add tape and solvent if you don’t already have your supplies.

 View full details

Winn / GRIP ROOM

Give your long putter some room to work.

This two-piece Excel grip provides separate round gripping sections for a long-putter setup. The black-and-gray design uses a .620-inch core and has a manufacturer-listed combined weight of 134g.

The details that shape your grip

Grip at a glance

Putter grip
Shape
Two-piece round
Feel
Medium
Texture
Wrap-style surface
Material
Excel polymer
Winn Excel 2-Piece Round Black/Gray (2PWR-BKG), official product photo01

Two sections. One planned fit.

Separate round sections let a compatible long-putter build accommodate separated hand positions.

Manufacturer photography: Winn. Illustrated color and size may differ from your selection.

02 / Specifications

Know exactly what you’re gripping.

Manufacturer reference specifications. Choose your size and color in the product options above.

Manufacturer details
Construction
Excel polymer
Texture
Wrap-style surface
Profile
Two-piece round
Compatibility
For a compatible long-putter shaft. Confirm both section positions and shaft diameters before applying tape. The .620-inch figure is the core opening, not the installed outside diameter.
SizeCoreNominal weight
2-Piece RoundCombined weight of both sections0.620 in134 g

Manufacturer nominal specifications. Core size is the shaft opening, not the finished outside diameter. Check the grip packaging and shaft before installation.

Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.

03 / Find your feel

Good fit starts with feel.

A specialist fit for long putters and separated hand positions. Confirm the shaft diameter and grip placement with your club builder before installation. The .620-inch core opening must fit both intended shaft positions. This set is not a one-piece replacement grip.

Back to options
How should I choose a putter grip size?

Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.

For woods & irons: grip calculator
Can I use this like a one-piece putter grip?

It is a two-section set for a compatible long putter. The lower sleeve and upper capped section need planned positions on the shaft. Check both shaft diameters and hand positions before installation; the listed 134g is the combined nominal weight.

How do I install this grip?
  1. Check shaft diameter at both sections; mark their positions. Gather tape, compatible solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; ventilate and avoid flames.
  2. Clamp gently. Cut the old grip away from your body; remove it and old tape. Never cut or scrape graphite. Clean and dry the shaft.
  3. Tape both marked areas with one layer; remove backing. Fold 1/4 inch over the shaft end. No build-up tape.
  4. Wet the lower sleeve and taped shaft with solvent. Slide the lower sleeve on first to its mark, without stretching or twisting.
  5. Cover the upper vent hole; wet inside and its taped area. Slide the upper section on; seat its cap at the shaft end. Check both positions.
  6. Wipe excess solvent. Follow label drying times. Before play, check both sections are dry, secure and cannot twist.
How do I clean and care for this grip?
  1. Dampen a soft towel lightly with water and gently wipe the grip. Do not saturate the towel or immerse the grip.
  2. Pat dry with a soft towel. Do not rub vigorously, use a brush or wash with soapy water; these can damage the surface.
  3. Let the grip dry fully before storage and check for surface wear before play.