01A consistent lower hand.
The parallel profile keeps a uniform lower-hand shape.
THE GRIP, UP CLOSE01 / Zenergy Tour 2.0
Superstroke
SuperStroke Zenergy Tour 2.0 Putter Grip
SuperStroke Zenergy Tour 2.0 Putter Grip
A parallel Tour profile, soft outer layer and a clear hand-position reference. Tour 2.0 offers a fuller hold without going to the largest size.
See grip characteristicsRegular price
$38.00
Regular price
Sale price
$38.00
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
One grip per quantity selected. Choose the options for your build.
SpecificationsReady to regrip?Optional add-on
Just Basic Brampton Grip Kit
Grip tape + 4 oz HF-100 solvent
Installing at home? Add tape and solvent if you don’t already have your supplies.
SuperStroke / GRIP ROOM
Find your feel on the green.
A parallel Tour profile, soft outer layer and a clear hand-position reference. Tour 2.0 offers a fuller hold without going to the largest size.
The details that shape your grip
Grip at a glance
- Profile
- Parallel / No Taper
- Feel
- Soft polyurethane outer
- Surface
- Multi-zone texture and enhanced SPYNE ridge
- Construction
- Polyurethane outer layer; EVA foam core
01
02A hand-position reference.
The raised SPYNE ridge gives your hands a repeatable reference along the underside.
03Texture with a soft touch.
Multi-zone patterning adds distinct contact areas across the polyurethane surface.
Manufacturer photography: SuperStroke. Illustrative color may differ from your selected option.
02 / Specifications
Know exactly what you’re gripping.
Manufacturer reference specifications. Choose your size and color in the product options above.
Manufacturer details- Construction
- Polyurethane outer layer; EVA foam core
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Profile
- Parallel / No Taper
- Compatibility
- Tech-Port compatible. CounterCore weights and compatible accessories are sold separately.
| Size | Core | Nominal weight |
|---|---|---|
| Tour 2.0Length 10.5 in · Width 1.17 in | 0.580 in | 55 g |
Manufacturer nominal reference specifications. A dash means the figure is not confirmed for this option. Verify packaging and shaft dimensions before installation.
Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.
03 / Find your feel
Good fit starts with feel.
Start with the shape you prefer in your hands: Parallel / No Taper. Compare it using your usual putting hold. Grip weight can change the balance you feel in the putter.
Back to optionsHow should I choose a putter grip size?
Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.
For woods & irons: grip calculatorCan I add a counterweight or accessory?
Tech-Port compatible. CounterCore weights and compatible accessories are sold separately.
How do I install this grip?
- Check shaft fit. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
- Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
- Clean and dry the shaft. Apply one smooth layer of double-sided grip tape, peel its backing and fold the overhang over the shaft end.
- Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
- Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the front to the putter face before it sets.
- Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
- Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
- Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
- Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.
SUPERSTROKE / Find your feel
Pick the connection that suits you.
Compare the shape, surface and profile you prefer.