01A shaped upper hand.
The pistol-style top creates a defined place for your lead hand.
THE GRIP, UP CLOSE01 / Zenergy Pistol
Superstroke
SuperStroke Zenergy Pistol GT – Your Hand’s New Best Friend
SuperStroke Zenergy Pistol GT – Your Hand’s New Best Friend
A curved upper section helps the lead hand settle in, while the lower section keeps SuperStroke’s parallel profile. Compare Tour, 1.0 and 2.0 by both shape and weight.
See grip characteristicsRegular price
$38.00
Regular price
Sale price
$38.00
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
One grip per quantity selected. Choose the options for your build.
SpecificationsReady to regrip?Optional add-on
Just Basic Brampton Grip Kit
Grip tape + 4 oz HF-100 solvent
Installing at home? Add tape and solvent if you don’t already have your supplies.
SuperStroke / GRIP ROOM
A familiar pistol shape, sized your way.
A curved upper section helps the lead hand settle in, while the lower section keeps SuperStroke’s parallel profile. Compare Tour, 1.0 and 2.0 by both shape and weight.
The details that shape your grip
Grip at a glance
- Profile
- Pistol upper; No Taper lower
- Feel
- Soft polyurethane outer
- Surface
- Multi-zone texture and enhanced SPYNE ridge
- Construction
- Polyurethane outer; core construction varies by size
01
02Size is more than width.
Pistol 1.0 weighs 83 g; the larger Pistol 2.0 weighs 51 g. Compare the balance as well as the feel.
03Your reference underneath.
Enhanced SPYNE and multi-zone texturing support repeatable hand placement.
Manufacturer photography: SuperStroke. Illustrative color may differ from your selected option.
02 / Specifications
Know exactly what you’re gripping.
Manufacturer reference specifications. Choose your size and color in the product options above.
Manufacturer details- Construction
- Polyurethane outer; core construction varies by size
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Profile
- Pistol upper; No Taper lower
- Compatibility
- Tech-Port compatible; CounterCore weights are sold separately. Pistol 2.0 cannot combine the Ball Pick Up with a CounterWeight.
| Size | Core | Nominal weight |
|---|---|---|
| Pistol TourWidth 1.09 in | 0.580 in | 69 g |
| Pistol 1.0Width 1.14 in | 0.580 in | 83 g |
| Pistol 2.0Width 1.32 in | 0.580 in | 51 g |
Manufacturer nominal reference specifications. A dash means the figure is not confirmed for this option. Verify packaging and shaft dimensions before installation.
Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.
03 / Find your feel
Good fit starts with feel.
Start with the shape you prefer in your hands: Pistol upper; No Taper lower. Compare it using your usual putting hold. Grip weight can change the balance you feel in the putter.
Back to optionsHow should I choose a putter grip size?
Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.
For woods & irons: grip calculatorCan I add a counterweight or accessory?
Tech-Port compatible; CounterCore weights are sold separately. Pistol 2.0 cannot combine the Ball Pick Up with a CounterWeight.
How do I install this grip?
- Check shaft fit. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
- Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
- Clean and dry the shaft. Apply one smooth layer of double-sided grip tape, peel its backing and fold the overhang over the shaft end.
- Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
- Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the front to the putter face before it sets.
- Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
- Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
- Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
- Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.
SUPERSTROKE / Find your feel
Pick the connection that suits you.
Compare the shape, surface and profile you prefer.