01Length with a purpose.
The 17-inch body gives you more room for alternative hand positions.
THE GRIP, UP CLOSE01 / Zenergy Tour 3.0 17-inch
Superstroke
SuperStroke Zenergy Tour 3.0 17" Putter Grip
SuperStroke Zenergy Tour 3.0 17" Putter Grip
The extended Tour 3.0 gives your hands 17 inches of grip to work with. Compare it for an armlock or counterbalanced build, with putter length and setup checked as part of the fit.
See grip characteristicsRegular price
$42.95
Regular price
Sale price
$42.95
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
One grip per quantity selected. Choose the options for your build.
SpecificationsReady to regrip?Optional add-on
Just Basic Brampton Grip Kit
Grip tape + 4 oz HF-100 solvent
Installing at home? Add tape and solvent if you don’t already have your supplies.
SuperStroke / GRIP ROOM
More room to find your hold.
The extended Tour 3.0 gives your hands 17 inches of grip to work with. Compare it for an armlock or counterbalanced build, with putter length and setup checked as part of the fit.
The details that shape your grip
Grip at a glance
- Profile
- Extended parallel Tour profile
- Feel
- Soft polyurethane outer
- Surface
- Multi-zone texture and enhanced SPYNE ridge
- Outer layer
- Polyurethane outer layer
01
02Room above the hands.
The extra length can extend above your hands for a counterbalanced setup, without a removable weight port.
03The Tour 3.0 profile.
A parallel body, SPYNE ridge and multi-zone texture carry the familiar Tour feel into an extended grip.
Manufacturer photography: SuperStroke. Illustrative color may differ from your selected option.
02 / Specifications
Know exactly what you’re gripping.
Manufacturer reference specifications. Choose your size and color in the product options above.
Manufacturer details- Construction
- Polyurethane outer layer
- Texture
- Multi-zone texture and enhanced SPYNE ridge
- Profile
- Extended parallel Tour profile
- Compatibility
- No Tech-Port. Does not accept CounterCore weights or the Tech-Port Ball Pick Up.
| Size | Core | Nominal weight |
|---|---|---|
| Tour 3.0 17-inchLength 17 in · Width 1.26 in | 0.600 in | 93 g |
Manufacturer nominal reference specifications. A dash means the figure is not confirmed for this option. Verify packaging and shaft dimensions before installation.
Weights are manufacturer nominal values and can vary. Core size describes the grip opening, not the finished outside diameter. Confirm shaft butt diameter and installation method before fitting.
03 / Find your feel
Good fit starts with feel.
Start with the shape you prefer in your hands: Extended parallel Tour profile. Compare it using your usual putting hold. Grip weight can change the balance you feel in the putter.
Back to optionsHow should I choose a putter grip size?
Try the shape and size with your usual putting hold. The paddle, back shape and diameter change how each hand contacts the grip. Choose the combination you find most comfortable; swing-grip hand-size measurements do not prescribe a putter grip size.
For woods & irons: grip calculatorCan I add a counterweight or accessory?
No Tech-Port. Does not accept CounterCore weights or the Tech-Port Ball Pick Up.
How do I install this grip?
- Check shaft fit. Gather grip tape, compatible grip solvent, vise, rubber shaft clamp, hook blade, cloth and tray. Wear eye protection; work with ventilation, away from flames.
- Clamp without crushing the shaft. Cut the old grip away from your body; peel off grip and tape. Never cut or scrape graphite.
- Clean and dry the shaft. Apply one smooth layer of double-sided grip tape, peel its backing and fold the overhang over the shaft end.
- Cover the grip’s vent hole. Wet its inside with compatible solvent, then pour the excess over all the tape into the tray.
- Slide fully on while wet, without stretching. Seat the cap against the shaft end; align the front to the putter face before it sets.
- Wipe excess solvent. Leave undisturbed for the drying time on your tape/solvent labels. Before play, check it is dry, secure and cannot twist.
How do I clean and care for this grip?
- Use warm water with a little mild dish soap and a soft cloth to gently clean the grip.
- Remove all soap with clean water, then towel dry. Let the grip dry fully before play or storage.
- Store away from direct sun and excessive heat. Replace a grip that is cracked, hardened or remains slippery after cleaning.
SUPERSTROKE / Find your feel
Pick the connection that suits you.
Compare the shape, surface and profile you prefer.